Suitable for lino, vinyl, painted concrete, laminate and textured flooring, CCX Floor Restore provides a versatile solution for routine maintenance and more demanding floor-cleaning jobs. The concentrated formula can be diluted according to the level of contamination, giving businesses better control over product usage and cleaning costs.
CCX Floor Restore can be applied manually using a mop, cloth or sponge, making it useful for edges, confined spaces and areas where other detergents could cause problems. Available in pack sizes from X to X litres, it’s a practical, hard-working floor cleaning solution for businesses that need consistently clean, professional-looking hard floors.
Features
- Concentrated, long-lasting floor cleaning detergent
- Removes stubborn grease, oils, and deep-seated dirt
- Suitable for lino, vinyl, painted concrete, laminate and textured flooring
- Adjustable dilution for heavily contaminated or lightly soiled floors
- Can be applied manually using a mop, cloth or sponge
- Available in X to X-litre pack sizes
Benefits
- Reduces the need for multiple specialist cleaning products
- Supports efficient cleaning with minimal foam residue
- Suitable for routine floor maintenance and heavier cleaning work
- Concentrated formula helps reduce the cost per cleaning application
- One product can be used for multiple hard-surface cleaning tasks
- Large pack options suit workshops, warehouses and high-use commercial sites
Technical Information
| Product Name | CCX Floor Restore |
| Product Type | Concentrated, long-lasting hard floor detergent |
| Appearance | Clear fluid with a slight odour |
| Typical Uses | Removal of stubborn grease, oils, and deep-seated dirt from hard surfaces |
| Suitable Surfaces | Lino, vinyl, painted concrete, textured flooring, laminate and other compatible hard floor surfaces |
| Severe Contamination | May be used undiluted where required |
| Application Method | Apply using a mop, cloth or sponge as required |
| Application Temperature | Between 5°C and 30°C |
FAQs About CCX Floor Restore
What is CCX Floor Restore?
Floor Restore is a C20, neutral-pH, low-foam cleaner developed for professional maintenance floors. It is designed to lift oils, grease, trafficked dirt and general working-environment contamination.
Why is low foam important?
Low-foam chemistry is particularly useful with automatic scrubbers and wet-recovery equipment because excessive foam can interfere with recovery, slow the cleaning process and contribute to residue.
How can Floor Restore be applied?
It can be used with suitable automatic floor scrubbers, mop-and-bucket cleaning, pressure-washing equipment and local manual-cleaning methods. The approved dilution and equipment instructions should always be followed.
Can it be used on every floor finish?
It is intended for a range of suitable professional floor types and coatings. Unfamiliar, aged or previously repaired finishes should be tested in an inconspicuous area before general use.
Does it leave the floor slippery?
It is designed to recover cleanly without leaving a sticky or slippery residue when used as directed. Floors may remain slippery while wet or where released oil and contamination have not been completely recovered.
Can Floor Restore be used on a major oil spill?
Significant free-standing oil or chemical spills should be contained and recovered first. Floor Restore is intended to clean the remaining contamination and does not replace proper spill-control procedures.
Can the used solution be discharged into a drain?
Contaminated wash water must be contained and disposed of in accordance with the contamination present and applicable local requirements. The cleaning product alone does not determine the correct disposal route.
Reviews
There are no reviews yet.